In stock. Dispatched in max. 1 business day.
oxyhero basic Stainless Steel CPAP Tube Cleaning Brush
- Effective: This top-of-the-line CPAP hose brush made of stainless steel allows for thorough cleaning of CPAP hoses. The bristles of the brush clean the inner side of the hose with gentle pressure. This prevents harmful mould or algae from settling in the hose.
- Robust material: The wire of the tube cleaning brush is made of durable stainless steel, so there is no risk of corrosion. With its sturdiness, you can apply enough pressure for great brush action. The soft bristles of the brush head will not damage your hose.
- Suitable for: With a total length of 152.5 cm and a brush head diameter of 19mm, the oxyhero basic CPAP hose brush is suitable for all standard CPAP hoses (with a 22mm outer diameter / 19 mm inner diameter) with up to 300 cm length. Not suitable for hoses with an inner diameter of 15mm.
Instructions for use:
While holding both ends of the hose, gently unroll and straighten the hose brush. To avoid material fatigue of the wire (caused by constantly winding and unwinding it), it is recommended to find a place to hang the brush.
Before using the brush, wash it with a mild detergent and warm water. Then rinse with cold water.
A mild detergent and lukewarm water should also be used to clean the CPAP hose. Cold or lukewarm water is recommended, as hot water can dry out the synthetic material of the hose and shorten its lifespan.
While keeping the hose as straight as possible to prevent unnecessary wear or damage, work the brush gently back and forth in short movements and slowly work deeper into the hose.
Insert the hose brush into the opposite end of the pipe to clean the other end.
Rinse the hose thoroughly with cold water after cleaning.
To dry the inside of the hose, connect it to the CPAP machine and allow it to run for about 15 minutes until the moisture evaporates.
Dry the brush bristles carefully by dabbing them with a towel or cloth. Then hang the brush in a room with sufficient air circulation.
- Total length: 152.5cm
- Brush head diameter: 19mm
The length of the brush is shorter than the length of a standard CPAP tube to make it even easier to handle the brush. Therefore, the CPAP hose should be cleaned from both sides with the brush.
SomniShop 30-day return policy
Regardless of your statutory right to cancel your order or return the product, you can return any product bought on SomniShop within 30 days of receiving the product as long as the product is complete, unused and undamaged. Products that are sealed for hygienic purposes (‘personal hygiene products’) can only be returned if the packaging seal has not been broken. You can find further details on our 30 day money back guarantee in our Terms and Conditions.